Day: September 17, 2019

Building a House

You want to get a new house and have weighed the options available to you. You have decided to build a new one instead of purchasing a previously owned one so that you will have all the options that you want. Here are the steps that it will take to build your new home.

Scoping the Territory

Before you break ground on the land that you purchased, you will need to have a property survey pinellas county fl. A surveyor will take measurements of the lot to determine the boundaries and where the best place to break ground will be. Once the construction company has this information, they will clear the area of any vegetation or garbage lying around that might impede construction.

Breaking Ground

Once everything has been marked out, the heavy machinery will come in to break the ground and dig out the foundation of the house. Initial plumbing and electrical is installed between the street and the home. Forms are erected that will be the basement walls. A cement truck is brought in to pour the concrete into the forms and then the walls are allowed to set. Once everything is dried, the forms are taken away for construction to begin.

Setting It Up

The next step in construction is to put up the frame and roof. The bare bones of the walls, floor and roof are constructed on the foundation with windows and doors roughed in. Once the house is secure from the elements, the plumbers and electricians return to run pipes and wires within the structure before the walls go up. Insulation is tucked in between the studs and in the roof then covered with boards and drywall. The actual windows and doors are installed as the floors and walls are finished inside. Siding is added to the outside and the roof is shingled to protect the building from the elements.…

3 Key Areas of Maintenance in Hydraulics

If you want to keep your fluid power system working efficiently and smoothly, you need to conduct proper cylinder maintenance. This should encompass the entire operating system and hydraulic cylinder parts. Here are five tips to ensure you are headed in the right direction with your action plan.

1. Work to keep your oil clean. A lot of hydraulic failures happen because of contaminated oil. It is crucial that you filter your oil. The dirt particles can get trapped inside the cylinder, so it’s important you have clean oil going into the cylinder. With high-efficiency filters, you can help improve the quality of your oil, provided the filter is changed regularly. Pay attention to the pressure gauge or indicator to help you know when the time is right.

2. Conduct regular cylinder inspection. Consistency look at the condition of the cylinder rod for the pitting, uneven wear, and corrosion. The presence of corrosion could mean there is excessive moisture within the housing or the fluid itself. If the moisture is in the fluid, then you could have more serious problems with the system. You will have accelerated seal wear with rod corrosion, and friction will damage the rod wiper and seal. Uneven wear might indicate there is a misalignment problem. Before repairing significant damage, determine the underlying cause to prevent a similar problem down the road.

3. Keep your cylinders rotated. If you cannot afford to shut down your system, it might be best to have a spare set of cylinder to rotate into service. This helps keep the cylinders fresh and minimizes particle contamination from extreme operating patterns. It is easier to remove a cylinder for complete cleaning and inspection. During this time, it is best to replace all the seals on the cylinder, since it an affordable but preventative damage measure.

Hydraulic systems improve the efficiency of many industries, but only when they are fully operational. Doing regular maintenance on your system will help prolong its life and keep you in business.…

3 Signs Your Well Has a Serious Problem

Water is the elixir of life, and when you, your home, and yard are depending on your well to supply that water, there can be a serious challenge when your well has problems. If you are trying to troubleshoot the issues that come up, you may find yourself in a complicated underground maze of diagnoses. To make it easier to understand the signals your system is sending out, here are three signs your well has a serious problem.

Sputtering Water

When you turn your water facet on and it spits air and water out, there is air in the system, and that is not good. Air can get into the lines through a crack in a tube or through a broken pump. Before you think about replacing a well pump Tampa FL, check with a specialty team to find out which problem it is.

Smelly Water

If you have an old well, chances are the supply lines used were metal, and they have corroded. There are times that a well can become contaminated with silt, decaying materials, or bacteria, but that is less common. If the problem is rust in your water, it can taste awful and be annoying, but not often dangerous. Have a qualified technician test your water to be sure.

No Water

If nothing comes out of your facet when you turn it on, there is a problem. It could be a circuit breaker, a low water table, or a broken pump. If it is the circuit breaker, it is an easy fix as you snap the circuit back together. If it is a low water table, you may have to wait a few days or weeks for the water table to rise again – or make your well go deeper into the water. If it is the pump, you will need to replace or repair it.

If you have a well, you are sure to have one or two problems, so having a certified technician you can call helps when you do. Make sure to have your water tested every year or two for safety’s sake.…